Manufacturer-sourced / No hands-on score
When to consider it
Consider the X4 when you need two groups of spools on separate schedules. Its four nominal positions and two chambers make it a relevant comparison with SUNLU S4 Pro and Sovol SH03. The published 85°C maximum is useful only if it covers your exact filament and reel instructions; a material requiring a higher temperature is not confirmed as a match.
Check before ordering
Creality lists a 45–85°C operating range, a 1–48 hour drying timer and a 382 × 290 × 270 mm unit. Check usable spool width for your chosen load arrangement, lid clearance and the exact regional power version. The manufacturer states that the product does not contain PTFE tube, so verify what the selected bundle supplies before comparing complete setup costs.
Published details that affect the choice
| Feature | Published detail |
|---|---|
| Temperature settings | 45–85°C |
| Drying timer | 1–48 hours |
| External size | 382 × 290 × 270 mm |
| Zones | Two; not four separate temperature recipes |
Alternatives worth comparing
Compare the S4 Pro and SH03 on the same four-spool, two-zone requirement. The standard SUNLU S4 is a shared-temperature alternative. X4L is a separate model and is not represented by this profile.
Supporting documentation
The published specification is a screening tool. Ask for evidence on any performance characteristic essential to your purchase.
Check the regional plug, stock, delivered price and returns at the manufacturer. This is a direct, non-commission link.
Source: Creality SpacePi X4 official product information. Checked 13 September 2026. Manufacturer information; not a hands-on test.